Campaigns and lists
Send email blasts and drip sequences to marketing lists from your own Outlook mailbox.
Campaigns let you email a group of contacts from your connected Microsoft 365 mailbox. A blast is a single email sent to everyone on a list. A drip is a sequence of emails sent one step at a time, with a delay between steps. Every campaign goes to a marketing list, so start by building the list you want to reach.
Open Campaigns in the CRM section of the sidebar. The Lists button at the top of the page takes you to your marketing lists.
Who can do what
Anyone with CRM access can view campaigns, lists and their results. Creating, editing, sending and scheduling need the CRM Editor or CRM Admin role. Deleting a campaign, a list, a drip step or a suppression needs CRM Admin.
Build a marketing list
There are two kinds of list:
- Static: you choose the contacts by hand.
- Dynamic: you set filter rules, and the list includes every contact that matches them. The rules are checked again each time a campaign uses the list, so new matching contacts are picked up automatically.
Start a new list
On Campaigns, select Lists, then New list.
Name it and pick a type
Enter a List name and choose Static or Dynamic under Type.
Add rules for a dynamic list
For a dynamic list, select Add filter rule under Filter rules and build the conditions (see below).
Create it
Select Create list.
Add contacts to a static list
Open the list and select Add contacts. Search by name, email or company, pick the people you want and add them. To take someone off, use Remove on their row.
Filter rules for dynamic lists
Each rule is a field, a condition and a value. Use the ALL / ANY switch next to Match contacts where to decide whether a contact must match every rule or just one of them.
You can filter on the person's Stage, Active, Source, Owner, Tags, Point of Contact, Billing Contact and Job Title, and on their company's name, stage, service type, industry, partner tag, city, state and country.
A few things worth knowing:
- Tags rules match a tag in any letter case. does not contain also includes people who have no tags at all.
- Rules about the company only count a company you can see. A person whose company is deleted, or private to someone else, is treated as having no company.
- Negative rules such as is not or does not contain on a company field include people with no company.
To change a list later, use Edit from its menu on the Marketing Lists page. Deleting a list removes the list and its contact associations, but campaigns that used it are not affected.
Create a campaign
Open the template library
On Campaigns, select New campaign. The Campaign Template Library opens.
Pick a template or start blank
Choose a template, enter a Campaign name and select Create Campaign from Template. Or choose Blank Campaign, enter a name, pick Blast or Drip under Type, and select Create blank campaign.
Choose who it comes from
Under Sender Details, pick an address in Send from, then check From name, From email and the optional Reply-to.
Write the subject and pick a list
Fill in Subject line and Preview text, and choose the list under Marketing List.
Write the email
Write the Email body in HTML. Use Insert Variable to add personal details, and Generate plain text from HTML to create the plain text version.
Drafts save automatically. The button in the header shows Auto-saved, Unsaved changes or Saved so you always know where you stand.
Connect Outlook first
Campaigns are sent from your own mailbox, not from a shared mail service. If Send from says to connect Microsoft Outlook, connect it first. See Microsoft 365.
Send from lists your own address, its same-domain aliases and the mail-enabled Microsoft 365 groups you belong to. To send from another shared address you have Send As or Send on Behalf rights to, select Add more addresses….
Personalize the email
Insert Variable adds these placeholders, which are filled in for each recipient:
| Variable | What it shows |
|---|---|
{{first_name}} | First name |
{{last_name}} | Last name |
{{email}} | Email address |
{{company_name}} | Company name |
{{unsubscribe_url}} | The recipient's unsubscribe link |
{{year}} | The current year |
If you paste an email designed in HubSpot, XODASH cleans up the pasted HTML and offers Convert all to XODASH format to change HubSpot's variables into the ones above.
Check it before you send
- Select Preview, then search for a contact to see the email with their details filled in.
- Under Send a Test Email, enter your address and select Send test. You need a Send from address before you can send a test.
Send or schedule a campaign
A draft can go out right away or at a time you choose. Both need a Send from address and a marketing list.
- Send now sends the campaign immediately to everyone on the list. This can't be undone.
- Schedule asks for a Date and Time, then Schedule send. The campaign shows as Scheduled with the time it will go out, and it sends automatically at that time. Your changes are saved first.
Sending can't be undone
Once a campaign is sending, the emails leave your mailbox. Send a test and preview it with a real contact first.
Each address on the list gets the campaign once, even if it appears on the list more than once. People who have unsubscribed or are on the suppression list are skipped.
Pause and resume
While a campaign is Sending, select Pause to set it to Paused. Select Resume to set it back to sending. You can only pause a campaign that is sending, and only resume one that is paused.
Build a drip sequence
A drip campaign has a Steps tab and an Enrollments tab next to Content.
Add steps
On Steps, select Add step. Each step has its own Subject, Delay (hours) and HTML body.
Set the delay
The delay is how long after the previous step this one is sent. A step with a delay of 0 is sent immediately.
Save each step
Select Save step. The step preview shows the email with sample details.
Manage enrollments
Enrollments lists the contacts in the sequence with their Status (Active, Paused, Completed or Exited), the step they're on, when they were enrolled and when the next email is due. Select contacts and use Pause selected, Resume selected or Exit selected, or use Pause and Resume on a single row.
A contact leaves the sequence on their own, and the Exit reason says why, when they unsubscribe, reply (if the step is set to stop on a reply), are merged into another record or deleted, or are no longer someone the sender can see.
Unsubscribes and suppressions
Every campaign email carries a standard unsubscribe header, so mail apps that support one-click
unsubscribe can show it. Add {{unsubscribe_url}} to your email body to include a visible link
as well. The link opens a page that asks the recipient to confirm with Unsubscribe me.
When someone unsubscribes:
- They are skipped by every future campaign, from any of your sending addresses.
- If they unsubscribe while a blast is still going out, they don't get the rest of it.
- Their drip enrollments end.
- Their person record shows Unsubscribed (primary) or Unsubscribed (secondary) for the address they used.
The suppression list lives in Settings → CRM → Suppressions. Hard bounces and complaints are added automatically. Use Add Suppression to block an address by hand, with a reason of Unsubscribe, Hard Bounce, Soft Bounce or Complaint. Removing an entry lets future campaigns reach that address again.
Track results
The Analytics tab shows Sent, Delivered, Opened, Clicked, Bounced and Unsubscribed, with rates. Below that, Recent Activity and a table of every recipient show each person's status, when it was sent, and how often they opened and clicked.
Recipients who are private to another user stay in the counts, but their name and address are hidden from you.
Resend to failed
Sometimes Microsoft refuses an email, or a mailbox can't be used for a while. Failed sends are never retried on their own. When a sent campaign has failures, the Analytics tab shows Not sent (certainly not delivered) and Outcome unknown (Microsoft didn't confirm either way), and the header shows Resend to failed.
Open Resend to failed
On a sent campaign, select Resend to failed. The dialog says how many recipients did not get the email.
Decide about unknown outcomes
If some sends have an unknown outcome, you can tick the box to include them. Some of those people may already have the email and would get it twice.
Resend
Select Resend to and the count. Only the failed recipients are sent the campaign again.
Other campaign actions
- Duplicate makes a copy of the campaign that you can edit and send.
- Save as Template adds the campaign to your Campaign Template Library with a Template name and optional Description.
- Delete (from the campaign's menu on Campaigns) permanently removes the campaign and its send history.
Good to know
- A blast only goes to list members the sender can see. If someone other than the campaign's creator sends it, private contacts are left out, so one person's private contacts never reach another person's mailbox.
- Use the All, Blast, Drip, Sent and Draft filters on Campaigns to find a campaign quickly.